|
Machine Model |
Machine Type |
Specification (part-n°/description) |
Type |
MFG date |
Erosion or spindle hours |
Serial # |
Remarks |
Status |
Location |
|
AC Classic 3 |
WIRE EDM |
STANDARD MACHINE NOT SUBMERGED |
Training machines |
2/2/1999 |
14,800 |
0109 |
USED - machine price reflects refurbished price with
install an 3 month warranty included. |
On stock |
560 BOND REFURB |
|
AC Classic V3 |
WIRE EDM |
846.074 UPDATE/AGIEVISION
012.684 AGIE SETUP 3D MEASURING PROBE
156.112 ALIGNMENT WIRE AND CENTERING DEVICE
449.104 SUPPORT HOLDER W/DIAL INDICATOR CLOCK |
New |
1/27/2010 |
0 |
0233 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
AC Progress VP2 |
WIRE EDM |
846.074 UPDATE AGIEVISION FOR EROSION
012.684 AGIESETUP 3D MEASURING PROBE
156.112 ALIGNMENT WIRE AND CENTERING DEVICE
449.104 SUPPORT/HOLDER W/DIAL INDICATOR CLOCK
500086274 KIT 50 EXTENSION FOR 0.05-0.1MM WIRE
011124 SF MODULE SUPER FINISH
500058594 EXTENSION KIT FOR 0.07-0.1MM WIRE |
Demo |
4/30/2009 |
0 |
0307 |
|
On stock |
LINCOLNSHIRE DEMO |
|
AC Progress VP2 |
WIRE EDM |
846.074 UPDATE AGIEVISION
012.684. AGIESETUP 3D MEASURING
156.112 ALIGNMENT WIRE AND CENTERING DEVICE
449.104 SUPPORT/HOLDER WITH DIAL INDICATOR CLOCK |
Demo |
11/19/2009 |
0 |
0324 |
|
On stock |
NORTH CAROLINA DEMO |
|
AC Progress VP2 |
WIRE EDM |
846.074 UPDATE AGIEVISION
012.684 3D MEASURING PROBE
156.112 ALIGNMENT GAUGE
449.104 DIAL INDICATOR CLOCK |
Demo |
11/27/2009 |
0 |
0325 |
|
On stock |
CALIFORNIA DEMO |
|
AC Progress VP2 |
WIRE EDM |
STANDARD CONFIGURATION |
New |
3/12/2010 |
0 |
0333 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
AC Progress VP3 |
WIRE EDM |
846.074 UPDATE AGIEVISION FOR EROSION
156.112 ALIGNMENT WIRE & CENTERING DEVICE
449.104 SUPPORT HOLDER W/DIAL INDICATOR CLOCK
012.684 AGIESETUP 3D MEASURING PROBE AND PICKUP CYCLE |
New |
12/15/2009 |
0 |
0212 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
AC Progress VP3 |
WIRE EDM |
846.074 UPDATE AGIEVISION
156.112 ALIGNMENT WIRE AND CENTERING DEVICE
449.104 SUPPORT HOLDER WITH IND. CLOCK
012.684 AGIESETUP 3D MEASURING PROBE |
New |
2/15/2010 |
0 |
0213 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
AC Vertex 2F |
WIRE EDM |
012.684 AGIESETUP 3D MEASURING PROBE
036674 METER WIRE TENSION
449.104 SUPPORT WITH HOLDER DIAL IND.
846.074 UPDATE AGIEVISION FOR EROSION
500086264 FINE WIRE OPTION MODULE
500058594 EXTENSION KIT FOR .07-.1 MM WIRE |
Demo |
1/15/2010 |
0 |
0001 |
|
On stock |
HOLLISTON DEMO |
|
AC Vertex 3F |
WIRE EDM |
THIS MACHINE WAS ORDERED AS A VANTAGE 3 - MAY ALSO BE
CONSIDERED A CHALLENGE MODEL
012.684 AGIESETUP 3D MEASURING
036674 METER WIRE TENSION
449.104 SUPPORT/HOLDER W/DIAL INDICATOR CLOCK
846.074 UPDATE AGIEVISION FOR EROSION
500063364 I/O INTERFACE FOR AGIEVISION
500086264 FINE WIRE MODULE OPTION FOR VANTAGE 3/VERTEX
500058594 EXTENSION KIT FOR 0.07-0.1MM WIRE |
Demo |
12/15/2009 |
|
0001 |
THIS IS A SPECIAL VERSION MACHINE MADE SPECIFICALLY FOR
USA MARKET - FOR OUR DEMO TO PROMOTE MACHINE |
On stock |
LINCOLNSHIRE DEMO |
|
AT Spirit 2 |
DIESINKING EDM |
049144 INTEGRATED C-AXIS FOR POSITION
500.056.374 TOOL CHANGER 4 POSITION
500056944 QUILL CHUCK 3R |
Demo |
4/29/2008 |
0 |
0052 |
|
On stock |
HOLLISTON DEMO |
|
AT Spirit 2 |
DIESINKING EDM |
049144 INTEGRATED C-AXIS FOR POSITION
500.056.374 TOOL CHANGER 4 POSITION
500056944 QUILL CHUCK 3R |
New |
5/28/2008 |
0 |
0053 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
AT Spirit 4 |
DIESINKING EDM |
5000056944 3R MACRO QUILL CHUCK
5000060384 VARIANT POWER MODULE |
New |
1/27/2010 |
0 |
0098 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
Cut 1000 |
WIRE EDM |
500089484 FINE WIRE MODULE
OIL TECH VERSION
500064784 AGIESETUP 3D MEASURING PROBE
047204 SUPPORT WITH DIAL INDICATOR AND HOLDER
846.074 UPDATE AGIEVISION FOR EROSION
834/654 WIRE TENSION MEASURE DEVICE
500.057.724 KIT JET NOZZLE |
Demo |
2/17/2010 |
|
0012 |
FOR DEMO - OIL VERSION - AND IMTS |
On stock |
LINCOLNSHIRE DEMO |
|
Cut 20 |
WIRE EDM |
BASIC CONFIGURATION |
Demo |
5/25/2009 |
|
033010 |
"P" CONSIGNED TO CANADA THROUGH ELLIOTT |
On stock |
CANADA CONSIGN ELLIOTT |
|
Cut 20 |
WIRE EDM |
standard USA configuration |
Demo |
3/3/2010 |
|
043002 |
DEMO LINCOLNSHIRE |
On stock |
LINCOLNSHIRE DEMO |
|
Cut 20 |
WIRE EDM |
STANDARD BASIC |
2nd hand |
4/1/2008 |
1,484 |
015006 |
Consigned to distributor in St. Louis for their show in
May |
On stock |
Consigned to Hartwig for their local
show in St. Louis in May |
|
Cut 30 |
WIRE EDM |
BASIC STANDARD USA MACHINE
ASSIGNED TO DEMO IN MAY |
Demo |
3/26/2010 |
|
010003 |
|
On stock |
NORTH CAROLINA DEMO |
|
Drill 11 |
HIGH SPEED EDM DRILL |
388.016.762 OPTION FOR 60 HZ POWER SUPPLY |
Demo |
4/12/2008 |
20 |
026001 |
|
On stock |
MINNESOTA |
|
Drill 11 |
HIGH SPEED EDM DRILL |
388.016.762 OPTION FOR 60 HZ POWER SUPPLY |
Demo |
12/1/2009 |
70 |
027002 |
|
On stock |
NORTH CAROLINA DEMO |
|
Drill 11 |
HIGH SPEED EDM DRILL |
388.016.762 OPTION FOR 60 HZ POWER SUPPLY |
Demo |
12/1/2009 |
70 |
027005 |
CONSIGN TO ELLIOTT IN CANADA |
On stock |
CANADA CONSIGN ELLIOTT |
|
Drill 11 |
HIGH SPEED EDM DRILL |
BASIC CONFIGURATION |
Demo |
7/29/2009 |
0 |
027010 |
|
On stock |
LINCOLNSHIRE DEMO |
|
Drill 11 |
HIGH SPEED EDM DRILL |
BASIC CONFIGURATION |
Demo |
12/10/2009 |
0 |
029002 |
|
On stock |
HOLLISTON DEMO |
|
Drill 11 |
HIGH SPEED EDM DRILL |
BASIC CONFIGURATION |
New |
1/13/2010 |
0 |
029007 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
Drill 20 |
HIGH SPEED EDM DRILL |
DRILL 20 BASIC MACHINE |
Demo |
4/3/2010 |
|
001002 |
Demo machine and IMTS machine |
On stock |
LINCOLNSHIRE DEMO |
|
FI 240 CCS |
WIRE EDM |
135000173 CLAMPING KIT
200000891 HARDENED CLAMPING TABLE
WD0260 LAMP ASSEMBLY FOR WORK AREA |
Demo |
12/9/2009 |
|
240048 |
|
On stock |
NORTH CAROLINA DEMO |
|
FI 240 CCS |
WIRE EDM |
135000173 CLAMPING KIT
200000891 TABLE CLAMPING HARDENED
WD0260 LAMP ASSEMBLY FOR WORK AREA |
Demo |
1/15/2010 |
|
240050 |
|
On stock |
HOLLISTON DEMO |
|
FI 240 CCS |
WIRE EDM |
135000173 CLAMPING KIT
20000891 HARDENED TABLE
WD0260 LAMP ASSEMBLY FOR WORK AREA |
New |
1/27/2010 |
0 |
240052 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
FO 350S |
DIESINKING EDM |
"SP" VERSION
DD0550 - ACCURA-C-AXIS WITH INERTIA
DD1662 TOOL CHANGER ROTARY 32 POSITION |
Demo |
5/12/2009 |
100 |
643069 |
|
On stock |
CALIFORNIA DEMO |
|
FO 350S |
DIESINKING EDM |
DD0550 C-AXIS
007523 EROWA CHUCK
112680775 LINEAR TOOL CHANGER |
Demo |
12/14/2009 |
|
643115 |
"P" VERSION |
On stock |
NORTH CAROLINA DEMO |
|
FO 550S |
DIESINKING EDM |
DD0540 C-AXIS
DD0798 128 AMP
ROTARY TOOL CHANGER |
Demo |
12/4/2009 |
|
667508 |
|
On stock |
LINCOLNSHIRE DEMO |
|
FO 550S |
DIESINKING EDM |
DD0540 ACCURA HIGH-INERTIA "C" AXIS OPTION FO550
DD0725 TOOL CHANGER LINEAR 6 POSITION 3R MACRO
3R-600.83 MACRO CHUCK - AUTOMATIC - |
New |
2/26/2010 |
0 |
0603 |
"SP" version |
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
FO 550S |
DIESINKING EDM |
DD0540 ACCURA C-AXIS HIGH INERTIA
DD162 ROTARY TOOL CHANGER 32 POSITION 3R MACRO
DD1620 DOUBLE GRIPPER
3R-600.83 MACRO CHUCK |
New |
2/26/2010 |
0 |
0604 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
Form 20 |
DIESINKING EDM |
322012095 OPTION FOR 60 HZ POWER SUPPLY |
Demo |
4/25/2008 |
0 |
002005 |
Temporarily sold to THE EDM SHOP, they upgraded to a
FORM30 & we took the FORM20 back to CA demo center |
On stock |
CALIFORNIA DEMO |
|
Form 20 |
DIESINKING EDM |
BASIC CONFIGURATION |
Demo |
12/11/2009 |
0 |
010002 |
|
On stock |
LINCOLNSHIRE DEMO |
|
Form 20 |
DIESINKING EDM |
BASIC CONFIGURATION FOR USA |
Demo |
12/11/2009 |
0 |
009010 |
|
On stock |
NORTH CAROLINA DEMO |
|
Form 20 |
DIESINKING EDM |
BASIC CONFIGURATION FOR USA |
Demo |
12/11/2009 |
0 |
010001 |
going to CANADA open house in APRIL 2010 |
On stock |
CANADA DEMO |
|
Form 20 |
DIESINKING EDM |
STANDARD BASIC |
New |
3/30/2010 |
0 |
011003 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
Form 20 |
DIESINKING EDM |
STANDARD BASIC |
New |
3/30/2010 |
0 |
011001 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
Form 20 |
DIESINKING EDM |
STANDARD BASIC |
New |
3/30/2010 |
|
011002 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
Form 30 |
DIESINKING EDM |
basic standard with
383.507.161 transducer assy, for pump 60 hz. |
New |
3/26/2010 |
|
005006 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
HD20 |
HIGH SPEED EDM DRILL |
50 AMP POWER
1.0MM + .5MM WIRE GUIDES |
R+D |
1/1/2007 |
100 |
2000236 |
R&D MACHINE FROM FACTORY |
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
HPM 800U HD |
MILLING |
NOT AVAILABLE FOR SALE TILL AFTER IMTS IN SEPTEMBER 2010
254.01/00 VARIANT HD
254.08/04 SPINDLE 20,000 - HSK-A63
254.09/02 TOOL MAGAZINE 60
254.04/04 ROTARY/TILT TABLE DIA. 630 T-SLOTS PARALLEL
600.12/02 SPRAY GUN
254.11/04 LIFT UP CHIP CONVEYOR
600.11/02 BAND FILTER SYSTEM 650 I
600.11/04 THROUGH SPINDLE COOLANT 18-70 BAR
600.10/02 ROTATING WINDOW
254.12/40 COMPLETE MACHINE ENCLOSURE AUTOMATIC
254.12/09 MIST EXTRACTION UNIT
600.12/01 MOVABLE HAND WHEEL
600.12/15 LASER MEASURING SYSTEM
600.12/10 PREPARATION TOUCH PROBE INFRARED
600.12/09 TOUCH PROBE INFRARED 40.00 -TX/RX
500.52/01 APS ADVANCED PROCESS SYSTEM
500.52/07 ITC INTELLIGENT THERMAL CONTROL
500.52/08 ITC-5X INTELLIGENT THERMAL CONTROL 5 AXIS |
Demo |
2/16/2010 |
0 |
107.57.00.009 |
NOT AVAILABLE TO SELL TILL AFTER IMTS IN SEPTEMBER 2010 |
On stock |
HOLLISTON DEMO |
|
HSM 300 |
MILLING |
205.12/10. OIL MIST SPRAY UNIT
206.12/09. PREP FOR TOUCH PROBE
500.12/02. ELECTRONIC MOVABLE HAND WHEEL
500.52/13. DNC REMOTE NETWORK ACCESS
207.09/02. TOOL CHANGER TCD27 HSK E40
A-5069-0001. RENISHAW PROBE KIT (USA)
NO GRAPHITE EXTRACTION UNIT OR PREP - CAN BE ADDED |
2nd hand |
2/28/2006 |
450 |
107.07.00.009 |
- Used machines may be in refurbishment at the time of
this viewing. Book Value not finalized till refurbish is
complete. Please contact to verify correct values. |
On stock |
560 BOND REFURB |
|
HSM 400U |
MILLING |
205.08/3 SPINDLE OPTION 42,000 RPM
205.09/5 TOOL CHANGER TCD 68 HSK E40
205.10/10 ROTATING WINDOW
20510/3 MACH ENCLOSURE 9SCRATCHPROOF)
205.11/2 LIFT-UP CHIP CONVEYOR
205.12/01 TOUCH PROBE PS 32.00 HSK E 4
205.12/02 INSTALL KIT PREP FOR TOUCH
205.12/10 OIL MIST SPRAY UNIT
205.12/13 OIL MIST EXTRACTION UNIT
205.12/20 TOOL CLEANING BY AIR BLAST
205.12/40 ROBOT INTERFACE OPTION
205.12/51 BEACOM
500.12/02 ELECTRONIC MOVABLE HAND WHEEL
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/02 EXTENDED "APS" OPTION (ADVANCE PROCESS)
500.52/07 "ITC" OPTION (INTELLIGENT)
500.52/08 ITC-5X 5 AXIS INTELLIGENT
500.52/09 "SPS" OPTION (SPINDLE PROTECTION)
S_2117/01 ROTARY TILTING TABLE 3R Macro
S_2117/03 2ND COOLANT NOZZLE
907.015 TRANSFORMER (USA) |
Demo |
7/14/2008 |
510 |
107.87.00.180 |
|
On stock |
ILLINOIS |
|
HSM 400U |
MILLING |
205.08/3 SPINDLE OPTION 42000 RPM/ HSKE40
205.09/5 TOOL CHANGER TCD 68 HSK E-40
287.04/09 ROTARY TILTING TABLE WITH MACROM 156
205.10/1 MACHINE ENCLOSURE W/POLYCARBONATE WINDOWS
205.11/2 LIFT-UP CHIP CONVEYOR HSM400
287.20/09 PALLET CHANGER MACRO MAGNUM
205.12/02 INSTALL KIT PREP FOR TOUCH PROBE PS. 32.00
205.12/01 TOUCH PROBE PS32.00/HSK E 40 FOR HSM400
205.12/10 OIL MIST SPRAY UNIT
285.12/05 ITNC530 ELECTRONIC MOVABLE HAND WHEEL OPTION
205.12/20 TOOL CLEANING BY AIR BLAST
287.04/27 PALLET MACRO MAGNUM
500.52/01 "APS" OPTION (ADVANCED PROCESS SYSTEM)
500.52/07 "ITC" OPTION (INTELLIGENT THERMAL CONTROL)
500.52/08 ITC-5X 5 AXIS INTELLIGENT THERMAL CONTROL
205.11/03 PAPER ROLL FILTER UNIT 200L |
2nd hand |
1/1/2006 |
|
107.87.00.145 |
|
On stock |
560 BOND REFURB |
|
HSM 600U |
MILLING |
205.12/02 INSTALL KIT PREP FOR TOUCH
205.12/10 OIL MIST SPRAY UNIT
205.12/20 TOOL CLEANING BY AIR BLAST
285.08/4 SPINDLE 36,000 PM HSKE50
285.09/09 TOOL CHANGER TCD60 HSK50E
285.10/1 MACHINE ENCLOSURE POLYCARB
285.11/2 SCRAPPER CHIP CONVEYOR
285.12/04 TOUCH PROBE
285.12/14 PREP FOR GRAPHITE DUST
288.04/2 ROTARY TILT TABLE
500.12/02 ELECTRONIC MOVABLE HAND WHEEL
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/07 "ITC OPTION (INTELLIGENT)
500.52/08 ITC-5X 5AXIS INTELLIGENT |
2nd hand |
2/28/2008 |
1,339 |
107.88.00.094 |
REFURBISHMENT WAS COMPLETED END OF FEB 2010 |
On stock |
560 BOND REFURB |
|
HSM 600U |
MILLING |
205.12/02 INSTALL KIT PREP TOUCH
205.12/10 OIL MIST SPRAY UNIT
205.12/17 GRAPHITE DUST REMOVAL UNIT
205.12/20 TOOL CLEANING BY AIR BLAST
285.08/4 SPINDLE 36,000 RPM HSK E50
285.09/09 TOOL CHANGER TCD60 HSK50E
285.10/2 MACHINE ENCLOSURE SCRATCH PROOF
285.11/2 SCRAPPER CHIP CONVEYOR
285.12/04 TOUCH PROBE PS 32.00 HSKE50
285.12/14 PREP FOR GRAPHITE DUST
288.04/2 ROTARY TILTING TABLE
288.20/05 PALLET CHANGER DYNAFIX
500.12/02 ELECTRONIC MOVABLE HAND WHEEL
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/07 "ITC" OPTION (INTELLIGENT)
500.52/08 ITC-5X 5 AXIS INTELLIGENT
500.52/16 "OSS" OPTION (OPERATOR SUPPORT)
907.016 TRANSFORMER (USA) |
Demo |
9/30/2008 |
0 |
107.88.00.113 |
|
On stock |
HOLLISTON DEMO |
|
HSM 600U |
MILLING |
to be determined, once machine is inspected, what
remains on the unit |
2nd hand |
5/5/2006 |
|
107.88.00.059 |
used machine - needs significant work, pending
inspection |
On stock |
|
|
HSM 600U ProdMod |
MILLING |
500.52/01 "APS" OPTION (ADVANCE PROCESS SYSTEM)
500.52/07 "ITC" OPTION (INTELLIGENT THERMAL CONTROL
500.52/08 ITC-5X 5 AXIS INTELLIGENT THERMAL CONTROL
285.08/6 SPINDLE 24,000 RPM HSK A63
285.10/30 MACHINE ENCLOSURE
285.09/38 TOOL CHANGER ATC 220 HSK-A63
S_2210/05 ROTARY TILT TABLE WITH EROWA UPC "P" AIR BLOCK
S_2491/01 ELECTRONIC SWITCHOVER F/TABLE CHUCK (SIBEL)
214/85.07.203 CHIP CONVEYOR-TRANSVERSAL (SIBEL)
285.12/41 ROBOT INTERFACE ASSEMBLY (NON-MIKRON DEVICE)
285.12/32 INSTALL KIT PREP FOR TOUCH PROBE
285.12/12 TOUCH PROBE PS 32.00
234.04/23 PALLET EROWA UPC 320x320MM
202.12/13/US OIL MIST EXTRACTION UNIT (USA
907.003 TRANSFORMER (USA) |
2nd hand |
12/28/2006 |
562 |
107.89.00.032 |
Used machines may be in refurbishment at the time of
this viewing. Book Value not finalized till refurbish is
complete. Please contact to verify correct values. |
On stock |
560 BOND REFURB |
|
HSM 600U ProdMod |
MILLING |
285.08/4 SPINDLE 36,000 RPM - HSK E50 HIGH TORQUE
285.09/34 TOOL CHANGER ATC 170 FOR SPINDLE WITH HSK-50E
285.10/30 MACHINE ENCLOSURE
285.11/20 CHIP CONVEYOR/COOLANT FILTERING UNIT
285.12/32 INSTALL KIT FOR PREP FOR TOUCH PROBE
285.12/04 TOUCH PROBE PS 32.00 HSK E50
285.12/25 MINIMUM LUBRICATION UNIT
234.11/05 ROTOCLEAR OPTION
234.12/51 WARNING LIGHT/BEACON
285.12/30 MIST EXTRACTION UNIT
500.52/01 "APS" OPTION
500.52/07 "ITC" OPTION
S_2291/03 ROTARY TILT TABLE WITH SPECIAL MACR0-MAGNUM
VDP
S_2291/01 WORKPIECE CHANGER MACRO MAGNUM TO VDP |
2nd hand |
1/1/2005 |
3,500 |
107.89.00.008 |
Used machines may be in refurbishment at the time of
this viewing. Book Value not finalized till refurbish is
complete. Please contact to verify correct values. |
On stock |
ILLINOIS |
|
HSM 700 |
MILLING |
42,000 RPM SPINDLE - HSK40E
72005 LASER TOOL MEASUREMENT
73308 TOOL CHANGER TCP 12
71898 CHIP EVACUATION MANUAL
73000 ENCLOSURE VENTILATION
71189 COOLANT SPRAY UNIT
71193 MACHINE PREP FOR GRAPHITE
72002 EDGE PROBE FOR THE SETUP MODE
SOLD "AS IS" |
2nd hand |
5/10/1998 |
|
107.82.98.050 |
Used machines may be in refurbishment at the time of
this viewing. Book Value not finalized till refurbish is
complete. Please contact to verify correct values. |
On stock |
560 BOND REFURB |
|
HSM 800 |
MILLING |
285.08/4 SPINDLE 36,000 RPM HSKE 50 HIGH TORQUE
285.09/09 TOOL CHANGER TCD60 HSK50E
285.40/0 CHUCK FOR MACHINING TABLE
285.10/1 MACHINE ENCLOSURE POLYCARB SCREENS
285.11/4 CONVEYOR SCRAP CHIPS FOR HIGH DEMAND
205.11/5 PAPER ROLL FILTER OPTION
285.20/01 PALLET CHANGER HSM600/800
205.12/02 INSTALL KIT PREP FOR TOUCH PROBE
285.12/04 TOUCH PROBE PS32.00 HSK E50
285.12/05 iTNC530 ELECTRONIC MOVABLE HAND WHEEL OPTION
205.10/10 ROTATING WINDOW
205.12/51 BEACOM
205.12/20 TOOL CLEANING BY AIR BLAST
500/52/01 "APS" (ADVANCE PROCESS SYSTEM)
500.52/07 "ITC" OPTION (INTELLIGENT THERMAL CONTROL) |
2nd hand |
1/1/2004 |
1,441 |
107.86.00.076 |
MACHINE IS MODIFIED TO SPECIAL EXTRA FLOOD COOLANT
SYSTEM FOR ALUMINUM CHIP CONTROL |
On stock |
560 BOND REFURB |
|
HSM 800 |
MILLING |
285.08/4 SPINDLE 36,000 RPM HSKE50 HIGH TORQUE
285.09/09 TOOL CHANGER TCD60 HSK50E
285.04/0 CHUCK FOR MACHINING TABLE
285.10/1 MACHINE ENCLOSURE POLYCARBONATE SCREENS
285.20/01 PALLET CHANGER
205.12/02 INSTALL KIT PREP FOR TOUCH PROBE
285.12/04 TOUCH PROBE
285.12/05 iTNC530 ELECTRONIC MOVABLE HAND WHEEL
205.10/10 ROTATING WINDOW
205.12/51 BEACOM
205.12/20 TOOL CLEANING BY AIR BLAST
500.52/01 "APS" OPTION (ADVANCE PROCESS SYSTEM)
500.52/07 "ITC" OPTION (INTELLIGENT THERMAL CONTROL)
CHIP CONVEYOR/BAND FILTER |
2nd hand |
1/1/2004 |
8,220 |
107.86.00.081 |
MACHINE IS MODIFIED TO SPECIAL EXTRA FLOOD COOLANT
SYSTEM FOR IMPROVED ALUMINUM CHIP CONTROL |
On stock |
560 BOND REFURB |
|
Other Die Sink (CT) |
DIESINKING EDM |
FO20A MACHINE
NO C-AXIS (CAN BE ADDED, FOR EXTRA $)
NO TOOL CHANGER (CAN BE ADDED FOR EXTRA $) |
2nd hand |
1/1/1997 |
4,900 |
220035 |
PENDING ORDER - TY SUGGS - END OF JAN |
On stock |
560 BOND REFURB |
|
Other Vertical Machining Center |
MILLING |
FADAL USED MACHINE
VMC-2216-HT
X-AXIS TRAVEL 22", Y-AXIS SADDLE TRAVEL 16", Z-AXIS
SPINDLE HEAD TRAVEL 20", MAX DISTANCE SPINDLE TO TABLE
24"
RAPID TRAVERSE RATE: 900 IPM (700 IPM in Z-Axis)
SPINDLE TAPER: CAT-40
SPINDLE SPEED: 10-10,000 RPM
SPINDLE DRIVE MOTOR 22.5 HP
AUTOMATIC TOOL CHANGER: 21 POSITIONS
MAX TOOL DIAMETER 3"/4" WITH ADJ POCKET EMPTY
MAX TOOL LENGTH: 15"
MAX TOOL WEIGHT: 15 LBS
POWER REQ: 65 AMPS @ 230 VAC
AIR REQ: 80 PSI, 15 SCFM
MACHINE WEIGHT: 8,300 LBS
MACHINE DIMS: 96" X 87" X 95"
FANUC 18iMB5 CNC CONTROL WITH AI NANO HIGH SPEED 3D
HIGH TORQUE MOTOR
DATA SERVER
SOFT/STOP STOP LIMIT CHECK
ADDITIONAL MEMORY
PCMCIA DRIVE
MB3
AIR/OIL SPINDLE
RIGID TAPPING
COOL POWER ON SPINDLE AND BALL SCREWS X,Y,Z
FULL ENCLOSURE |
2nd hand |
1/1/2006 |
2,880 |
012006068989 |
FADAL USED MACHINE
HOURS LISTED = CUTTING HOURS |
On stock |
LINCOLNSHIRE ILLINOIS |
|
SP 1 |
ACTSPARK EDM |
BASIC CONFIGURATION |
Demo |
1/5/2010 |
0 |
109008 |
BEING SET UP IN DEMO FOR STONE PRO FOR MULTIPLE MACHINE
ORDER ... TEST CUT BEING DONE ON IT SECOND HALF FEBRUARY |
On stock |
LINCOLNSHIRE DEMO |
|
UCP 600 Vario |
MILLING |
234.08/03 SPINDLE 20,000 RPM HSK63
234.09/02 TOOL CHANGER TCD30/HSK63
234.10/07 CABIN ENCLOSURE POLYCARB
234.10/09 SCRATCH PROOF SCREENS
234.12/02 TOUCH PROBE PS32.00 HSK63
234.12/08 TOOL CLEANING BY AIR BLAST
234.12/09 INSTALL KIT PREP FOR TOUCH PROBE
234.12/10 OIL MIST COOLANT SPRAY UNIT
234.12/13 OIL MIST EXTRACTION UNIT
237.11/02 CHIP CONVEYOR (LONG)
237.12/07 LASER TOOL MEASURING OPTION
244.12/31 TILT THE WORKING PLANE iTNC 530
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/05 SIGMA FMC (FLEXIBLE MFG)
500.52/06 "RNS" OPTION (REMOTE NOTIFICATION)
500.52/10-MK MODEM GSM/GPRS850/1900MHZ
S_2516/01 PALLET CHANGER OPTION F/3R MAC
s_2516/03 ROTARY TILT TABLE - TORQUE
S_2516/04 TAILSTOCK TO TORQUE - ROTARY
907.015 TRANSFORMER (USA) |
Demo |
4/21/2008 |
294 |
107.37.00.190 |
|
On stock |
560 BOND REFURB |
|
UCP 600 Vario |
MILLING |
234.04/28 PALLET 3R DYNAFIX 280x280MM
234.08/05 SPINDLE 20,000 RPM HSK63
234.10/07 CABIN ENCLOSURE POLYCARB
234.11/12 PAPER FILTER UNIT 50/60 HZ
234.12/02 TOUCH PROBE PS 32.00 HSK63
234.12/09 INSTALL KIT PREP FOR TOUCH
234.12/12 TOUCH PROBE PS 32.00 HSK63
237.04/02 ROTARY TILTING TABLE FOR 3R DYNAFIX
237.09/07 INTERMEDIATE HANDLING STATION
237.09/35 TOOL CHANGER ATC 75 FOR HSK-A63
237.11/02 CHIP CONVEYOR (LONG)
237.12/07 LASER TOOL MEASURING OPTION
237.20/10 PALLET CHANGER DYNAFIX 280X280
244.12/31 TILT THE WORKING PLANE ITNCA530
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/07 "ITC" OPTION INTELLIGENT
500.52/08 ITC-5X 5 AXIS INTELLIGENT
907.015 TRANSFORMER (USA) |
2nd hand |
11/12/2007 |
579 |
107.37.00.236 |
RETURNED FROM CUSTOMER - CONSIGNED AND RETURNED. |
On stock |
LINCOLNSHIRE DEMO |
|
UCP 600 Vario |
MILLING |
234.04/28 PALLET 3R DYNAFIX 280 x 280MM
234.08/05 SPINDLE 20,000 RPM /HSK63
234.10/07 CABIN ENCLOSURE W/POLYCARB
234.11/12 PAPER FILTER UNIT 50/60 HX
234.12/02 TOUCH PROBE PS 32.00 HSK63
234.12/08 TOOL CLEANING BY AIR BLAST
234.12/09 INSTALL KIT PREPARATION
234.12/12 SPRAY NOZZLE OPTION
237.04/02 ROTARY TILTING TABLE FOR 3R DYNAFIX
237.09/07 INTERMEDIATE HANDLING STATION
237.09/38 TOOL CHANGER OPTION ATC22
237.11/00 CHIP CONVEYOR FOR HIGHER DEMAND
237.12/07 LASER TOOL MEASURING OPTION
237.20/10 PALLET CHANGER DYNAFIX 280 x 280
244.12/31 TILTING THE WORKING PLANE iTNC 530
500.12/03 SIGNAL LIGHT BEACON VARIO
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/02 EXTENDED "APS" OPTION
500.52/07 "ITC" OPTION (INTELLIGENT)
500.52/08 ITC-5X 5 AXIS INTELLIGENT |
New |
7/11/2008 |
0 |
107.37.00.308 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
UCP 600 Vario |
MILLING |
234.04/28 PALLET 3R DYNAFIX 280 x 280MM
234.08/05 SPINDLE 20,000 RPM/ HSK63
234.10/07 CABIN ENCLOSURE W/POLYCARB
234.11/12 PAPER FILTER UNIT 50/60 HZ
234.12/02 TOUCH PROBE PS 32.00/HSK63
234.12/08 TOOL CLEANING BY AIR BLAST
234.12/09 INSTALL KIT PREP FOR TOUCH
234.12/12 SPRAY NOZZLE OPTION FOR COOLANT
237.04/02 ROTARY TILTING TABLE FOR 3R DYNAFIX
237.09/07 INTERMEDIATE HANDLING STATION
237.09/38 TOOL CHANGER OPTION ATC22
237.11/00 CHIP CONVEYOR FOR HIGHER DEMAND
237.12/07 LASER TOOL MEASURING OPTION
237.20/10 PALLET CHANGER DYNAFIX 280 x 280
244.12/31 TILT THE WORKING PLANE ITNC 530
500.12/03 SIGNAL LIGHT BEACON VARIO
500.52/01 "APS" OPTION (ADVANCE PROCESS)
500.52/02 EXTENDED "APS" OPTION
500.52/07 "ITC" OPTION (INTELLIGENT)
500.52/08 ITC-5X 5 AXIS INTELLIGENT |
New |
7/11/2008 |
0 |
107.37.00.310 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
VCE 1000 Pro-X |
MILLING |
500.12/01 STATIONARY HAND WHEEL
16,000 RPM SPINDLE |
New |
7/28/2008 |
0 |
VCE1000X+.0117 |
|
On stock |
LODISCO WAREHOUSE ILLINOIS |
|
VCE 1000 Pro-X |
MILLING |
500.12/01 STATIONARY HAND WHEEL OPTION
140.12/21 PREPARATION FOR TOUCH PROBE
OMP40/CAT 40 RENISHAW PROBE CAT 40 SHANK /50MM CERAMIC
STYLUS KIT
16,000 RPM SPINDLE |
2nd hand |
9/13/2007 |
1,000 |
VCE1000PRO-X+.0100 |
|
On stock |
HOLLISTON DEMO |
|
|
|
|
|
|
|
|
|
|
|
